﻿
 `7MM"""Mq.`7MMF'   `7MF'`7MM"""Yp, `7MM"""YMM  `7MMF'      `7MMF'      `7MMF'
   MM   `MM. MM       M    MM    Yb   MM    `7    MM          MM          MM  
   MM   ,M9  MM       M    MM    dP   MM   d      MM          MM          MM  
   MMmmdM9   MM       M    MM"""bg.   MMmmMM      MM          MM          MM  
   MM  YM.   MM       M    MM    `Y   MM   Y  ,   MM      ,   MM      ,   MM  
   MM   `Mb. YM.     ,M    MM    ,9   MM     ,M   MM     ,M   MM     ,M   MM  
 .JMML. .JMM. `bmmmmd"'  .JMMmmmd9  .JMMmmmmMMM .JMMmmmmMMM .JMMmmmmMMM .JMML.


 +-+-+-+ +-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+
 |Z|I|P| |P|A|C|K|A|G|E| |I|N|S|T|R|U|C|T|I|O|N|S|
 +-+-+-+ +-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+


/* FABRIC SPECIFIC FILES */

   SKU.jpg: Product scan non tileable (approximately 20x20cm)
   SKU_fwp.jpg: full width picture (fwp): non tileable (for roll preview)
   SKU_fws.jpg: full width simulation (fws): low res tileable vertically (for full width roll preview and positioning)
   SKU_mws.jpg: min width simulation (mws): tileable image for renderings


/* FURNITURE / LIGHTING / ACCESSORIES SPECIFIC FILES */

   SKU.dwg:  AutoCAD drawing
   SKU.pdf: Vector drawing
   SKU_3d.zip: 3D Model


/* COMPANY */

   Company: Rubelli S.p.a.
   Email: info[at]rubelli.com
   Location: Venice, Italy

   Website: https://www.rubelli.com
   Instagram: https://www.instagram.com/rubelli_group
   Facebook: https://www.facebook.com/rubelli
   Pinterest: https://www.pinterest.com/rubelli


/* FURNITURE AND UPHOLSTERY MAINTENANCE INSTRUCTIONS */

   In general our furniture and accessories are meant only for indoor use, since they have not been treated for outdoor use. In addition, we recommend to avoid exposure to direct sunlight, since this may change finish, aspect and colour of the materials.
   For all materials, we recommend to use dining table pads, placements and coasters on furniture to protect from spills, stains and heated objects. Do not use plastic or rubber on surfaces (particularly wood), as they may damage the finish. Use felt under objects set on top of furniture in order to avoid scratches.
   For regular maintenance use only a clean cloth slightly damped with a small dose of product recommended for the specific surface: never soak the cloth, since excess of humidity or excess of product may damage the surface. Do not use abrasive cleansers nor any solvent base products nor vinegar or lemon based cleansers for the bathroom. Make sure that there is no remaining soap on the surface.
   Do not clean by using paper cloths nor any other abrasive material, since they can scratch the surface.


   CARE AND CLEANING FOR STAINED WOOD, EXPOSED WOOD AND WOOD VENEER
   Excessive dampness, dryness, heat or cold can damage wood furniture. As wood is a natural product, high and low humidity will cause movement in the joints. Wipe up spills immediately to prevent spots that could ruin the finish. To remove dust from furniture surfaces, vacuum with a dusting brush attachment or use a clean soft cloth. If there is any ground-in dirt, use a mild wood cleaner. After the dirt is removed, wipe away with a clean dry cloth to remove any additional residue. Finally, any hand rubbed finishes need to be maintained frequently. The initial finish will absorb into the wood over time and should be re-oiled on both sides every six months. To clean, wipe down with a damp cloth and dry immediately. For upholstery COM/COL belonging to the Rubelli group please check maintenance instructions in the Rubelli catalogue or at www.rubelli.com.
   For other suppliers’ COM/COL please refer to their
   own instructions.


   CARE AND CLEANING FOR LACQUERED SURFACES
   Excessive dampness, dryness, heat or cold can damage wood furniture. As wood is a natural product, high and low humidity will cause movement in the joints. Wipe up spills immediately to prevent spots that could ruin the finish. To remove dust from furniture surfaces, vacuum with a dusting brush attachment or use a clean soft cloth. After the dirt is removed, wipe away with a clean dry cloth to remove any additional residue. Do not use any detergents or cleaning products of any kind.


   CARE AND CLEANING FOR GLASS
   For smooth and shiny surfaces use a damp cloth to remove any dust that may have built up. To clean away dirt, use a mild ecofriendly glass cleaner. Be sure to wipe thoroughly.


   CARE AND CLEANING FOR METAL
   Remove dust by using a soft cloth. In order to remove dirt, use very little mild soap and water on a soft cloth. After the dirt is removed, wipe away with a clean dry cloth to remove any additional residue. Never use brass polish or an abrasive cleaner. Our metals are not treated for outdoor environments; the finish may oxidize if exposed to a humid environment. Please note that metals can be scratched easily: do not use any paper towels nor any rough items to clean: once metals are scratched you cannot remove the scratches on your own.


   CARE AND CLEANING FOR MARBLE, ONYX, STONE OR GRANITE
   As marble is a natural product, veining and other natural lines in the stone are part of its natural beauty and will vary from piece to piece. Marble is porous and stains easily. For general stone care, wipe up spills immediately. To clean stone tops more thoroughly, use a mild detergent solution. Clean spills with a soft, damp cloth using a blotting motion. If necessary, use a mild, pH neutral specialty stone cleaner. Marble which has become dull can be livened up by using a commercial marble cleaner and polish. Do not use wood furniture polish to clean the stone. It will result in the stone changing colour.


   CARE AND CLEANING FOR LEATHER
   Leather is a natural product. Any scratches and surface marks should not be considered a defect but an inherent characteristic of the leather. Each dyed piece may vary in color and overall appearance. Never place leather in direct sunlight as it can change the color or cause the finish to fade. To clean, wipe down with a damp cloth to remove any dust. Leather will have a tendency to dry out and crack over time if it is not maintained. We recommend a light coat of a non-solvent based leather cream to be used to keep the leather supple.
   Do not over rub the leather as it will remove the finish and strip away the color.


   CARE AND CLEANING FOR RESIN PRODUCTS
   Resin products should be cleaned only with water and soap or with a detergent free from abrasive substances or alcohol.
   The resin has got an electrostatic charge that naturally attracts dust. For this reason, after cleaning the surface should be treated with a soft cloth slightly damped with an antistatic substance. Such a treatment should be carried out once a month. 

